KBT EC 180

Kitchen box fan type KBT-EC
The KBT EC fans have a galvanized impeller with forward-curved blades made of sheet steel. The housing is acoustically insulated with 50mm rock wool, non-flammable (DIN 4102) and made of galvanized sheet steel.

The door locked with screws and hinges can be opened for maintenance and cleaning, after which the motor and impeller can be opened. A protective plate prevents the leakage of oil and grease. The door opening from right to left can be changed with a slight adjustment.

The connection on the suction and blowing side is a double seal. The unit is supplied with mounting feet and rubber vibration dampers. The motor protection is an integrated thermal contact with wires to the outside. The fan is fitted with a condensate drain as standard.

The electronics are integrated in the motor housing. All models have one potential-free contact for error reporting. All motors are suitable for 50 / 60Hz. The input voltage for 1-phase versions can vary between 200 and 277V and for a 3-phase between 380 and 480V. Speed ​​control with a 0-10V signal. Each motor has an output voltage of 10V for an external potentiometer or sensor.